我欲封天txt下载,小说排行榜完结版,辰东

1.4435

00Cr17Ni14Mo2, X2CrNiMo18.14.3, 1.4435, Z 3 CND 17.11.02, TS 60, X2CrNiMo18.14.3, 1.4435, X2CrNiMo18.14.3, 1.4435, X2CrNiMo18.15.4, 1.4438, X2CrNiMo18.14.3,

1.4435數據表下載

1.4435化學成分 - DIN 17440 (1996)

C	Si	Mn	P	S	Ni	Cr	Mo
≤0.030	≤1.00	≤2.00	≤0.035	≤0.030	12.00-15.00	16.00-18.00	2.00-3.00

1.4435標準規范

DIN 17440 (1996) - Stainless steels - Technical delivery conditions for drawn wire
DIN 17441 (1997) - Stainless steels - Technical delivery conditions for cold rolled strips and slit coils strip and sheets cut from such strips for pressure purposes
DIN 17455 (1985) - Welded circular tubes of stainless steels for general requirements; technical delivery conditions
DIN 17456 (1985) - Seamless circular tubes of stainless steels for general requirements; technical delivery conditions
DIN 17457 (1985) - Welded circular tubes of austenitic stainless steels for special requirements; technical delivery conditions
DIN 17458 (1985) - Seamless circular tubes of austenitic stainless steels for special requirements; technical delivery conditions
DIN EN 10028-7 - Flat products made of steels for pressure purposes - Part 7: Stainless steels
DIN EN 10088-1 - Stainless steels - Part 1: List of stainless steels
DIN EN 10088-2 - Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
DIN EN 10088-3 - Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
DIN EN 10088-4 - Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
DIN EN 10088-5 - Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
DIN EN 10216-5 (2004) - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
DIN EN 10217-7 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
DIN EN 10222-5 - Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
DIN EN 10250-4 - Open die steel forgings for general engineering purposes - Part 4: Stainless steels
DIN EN 10253-3 - Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
DIN EN 10253-4 - Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
DIN EN 10272 - Stainless steel bars for pressure purposes
DIN EN 10296-2 (2005) - Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
DIN EN 10297-2 (2005) - Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel

1.4435機械性能

熱處理	最小值	最大值	近似值	備注

熱處理	最小值	最大值	近似值	備注

熱處理	最小值	最大值	近似值	備注

熱處理	最小值	最大值	近似值	備注

熱處理	最小值	最大值	近似值	備注

熱處理	Type	最小值	最大值	近似值	備注

Stainless and heat resisting steels

1.4435

1.4435

1.4435數據表下載

1.4435化學成分 - DIN 17440 (1996)

1.4435標準規范

1.4435機械性能

1.4435產品形態

網站導航

關于我們

郵件訂閱